Switch Interfaces
Results: 261
iClick Environmental Control
The iClick Environmental Control is a device designed for users with upper extremity and severe physical disabilities to allow them to operate up to two electrical appliances with an iPad or switches without room installations. With the iClick Environmental Control, users can turn electrical appliances on and off wirelessly using the free iClick app on the iPad. iClick also supports SimplyWorks wireless switches and any type of wired switch. iClick has two sockets that can be controlled independ
1-Switch Single Appliance Continuous Control Unit (Model 1490)
The 1-Switch Single-Appliance Continuous Control Unit, model 1490, is a switch control interface unit designed for use by individuals with upper exremity or severe physical disabilities. This remote control unit operates most AC appliances from a distance of up to 20 feet when the appliances are plugged into a receiver. A capability switch (not included) is used to activate the remote transmitter through either latch or momentary activation. With latch activation, the appliance runs until the us
4 Mini Button
The 4 Mini Button is pneumatic switch pad designed for use by individuals who use wheelchairs. This unit accommodates four switches (switches not included)to control power wheelchair chair seat functions and drive controls.
AbleNet PowerLink 4 Cotnrol Unit plus 2 Jelly Beamers Kit
The AbleNet PowerLink 4 Cotnrol Unit plus 2 Jelly Beamers Kit is an environmental control unit designed for individuals with upper extremity and emotional disabilities. This kit promotes participation in a broad range of activities, independence and self-esteem for switch users. Built in Linkable wireless technology combined with the Jelly Beamer wireless switches allow students to easily and safely activate appliances for activity inclusion from anywhere without having to move around. Intuitive
Adaptivation Pal Pad Switches
Pal Pad Switches is a pressure activated membrane switch designed for individuals with limited movement as a result of development delays and neurological involvement. It requires just the slightest touch - just 1.2 ounces of force to activate. The Pal Pad can be activated directly from above or at a shallow angle. Equipped with a 1/8-inch plug makes them usable with any communication air or battery-operated assistive device with a standard 1/8-inch jack. Rigid and durable pads are approximatel
Adaptive Fixtures Kit (Model Af-10-K)
The Adaptive Fixtures Kit is a switch mounting hardware kit designed for use as a replacement program or as an eveluation tool for properly mounting switches. The Kit is comprised of multi-purpose pieces and parts that can be used as "on the spot" replacement and sent on with the user. You can then reorder the parts as necessary to replace what has been used. The Kit can also be used as an evaluation tool where the parts never leave the Kit. Mountings can be experimented with to find a particula
Adaptive/Assistive 3.5 mm Button
The Adaptive/Assistive 3.5 mm Button is a 3D printable AT button. This device interfaces with a 3.5 mm mono jack system. The device is intended for individuals with physical disabilities. AT buttons can be used for individuals with limited range of motion to control his or her environment. The buttons can be used to adapt toys and home appliances so that they can be actuated with ease.
Aluminum Mounting Rods (Models 2062 & 2063)
The Aluminum Mounting Rods are switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. All models are aluminum. DIMENSIONS: Model 2062 is 3/8-inch in diameter and 12 inches long and model 2063 is 0.25-inch in diameter per foot.
Anchored Joystick And Button Computer Control Input Interface
CUSTOM ADAPTATIONPURPOSE: To provide a child with cerebral palsey with a stable interface to control a computer. A commercially available joystick and large button is used in place of a mouse and keyboard to control a computer. A metal plate and screwed stud is attached to the bottom of the base of the joystick. A hole is drilled in the child's desk, and the stud is screwed into a second plate on the underside of the desk. A nut holds the assembly in place while the joystick is in use. The butto
Applicator
APPlicator is a Bluetooth Switch Interface that allows children and adults with neurological and mobility disabilities who require simple switch access within apps and simple access to the media player on an iPad. It can be used with up to 4 switches or with a "tap" of a button go into "Quick-Media Mode" and use the same 4 switches to control your audio library. Users can press the Quick Media Mode button for pre-configured access to: play/pause, skip forward, skip back and Timed Play - 10 sec
Armrest Mounting Bracket (Model 3395)
Used in ocnjunction with a standard hand-control clamp for mounting a Model 3185 joystick for hand operation. Consists of a 1/2 inch diamter stainless steel mounting rod fitted to a 3/4 inch diamter mounting shaft to permit a wide range of joystick positioning.
Aroma Fan
The Aroma Fan is a battery-powered, aromatherapy fan designed for individuals with special needs to stimulate sensory motor development, reduce stress and anxiety, or create specific situation associations through aromatherapy. The fan is available in two versions. The standard non-switch version or the switch-activated version, which enables it to serve as an adapted toy and reward.
Articulating Arm (Model H-1)
The Articulating Arm is switch mounting hardware designed to enable control switches and communicators to be placed in virtually any position for individuals with upper extremity or severe physical disabilities. The adjustable arm attaches to a table, wheelchair, bed rail, etc. Three knobs permit adjustability and lock the unit in position.
Asl 6 Function Big Button Bed Control (Model Asl706)
The ASL 6 Function Big Button Bed Control, model ASL706, is a bed control designed for use by individuals with fine motor disabilities, cerebral palsy, or neurological or severe physical disabilities. This control interface for a six-function electric bed has six large push buttons. To operate, this unit interfaces with the ASL 703 Six Function Bed Control (not included; see separate entry). It allows each function to be accessed through the use of large mechanical buttons in place of the small,
Asl Egg Switch Finger Ring Mount (Model Asl300R)
The ASL Egg Switch Finger Ring Mount, model ASL300R, is switch mounting hardware designed for use by individuals with cerebral palsy or neurological or upper extremity disabilities. This mount for the ASL 300 Egg Switch (not included; see separate entry) holds the Egg Switch near the user's finger. Screws for the switch are included. OPTIONS: Egg switch (model ASL 300).
Asl Five Switch Adaptor Interface Box (Model Asl502)
The ASL Five Switch Adaptor Interface Box, model ASL502, is a control switch interface unit designed for use by individuals with neurological or severe physical disabilities or spinal cord injury. This switch interface unit enables an individual to utilize five separate switch sites to control up to five separate functions or devices. The unit can interface with powered seating modules, communication devices, etc., through a D-9 connector. It works with any mono port switch and all power chair t
Attainment Switch
Attainment Switch is a switch emulation program designed for used by individuals with cognitive, fine motor or upper extremity disabilities. This application (or app) allows a person to use their Apple iPad, iPhone or iPod Touch as a wireless accessibility switch. Attainment Switch can be used to communicate with scanning-enabled software running on any computer running the Mac or Windows operating system. The user can select from either one-button or two-button switch mode and use the app's bui
Auxilia Multikey Switch Interface
Auxilia MultiKey is designed for use by individuals with limited physical upper extremity strength and coordination as a result of cerebral palsy, stroke, or dystonia. It is a hardware switch interface that connects via the USB port and permits any 3.5 millimeters switch to be connected and used with a computer immediately. Auxilla MultiKey does not require any special setup software: simply plug it in and connect.
Battery Adapter (Model 720)
The Battery Adapter, model 720, is a switch adapter interface for single switch activation of any battery operated toy, tape recorder, or other device. Continuous pressure on the switch keeps the device running until the switch is released. The adapter can be used with the Switch Latch/Timer (see separate entry) to set action for a specified time period or to use switch hits for on and off. The disk end is inserted into the battery compartment; the other end plugs into any switch with a standard
Battery Device Adapter
The Battery Device Adapter is a cable which connects to and adapts battery-operated devices for external switch control. The cable is available in two sizes for use with a wide variety of battery-operated toys and devices powered by AA, C, or D batteries. The Battery Device Adapter consists of a circular, flexible copper disc and thin lead wire. A 1/8-inch switch jack permits connection to AbleNet's Big Red switch or Jelly Bean switches (see separate entries), or other compatible switches. A How
Battery Device Adapter
The Battery Device Adapter is a switch adapter for toys and other battery-operated devices, designed for use by children and adults with fine motor and upper extremity disabilities. This switch adapter is an interface control that can be used to adapt any battery operated toy or other device, such as a radio or CD player, for switch operation. The user inserts the adapter between the end of the battery and the contact, turns the device on, and plugs a switch into the mini-jack port. The toy or d
Battery Device Adapter
The Battery Device Adapter is a switch designed for individuals with neurological disabilities to turn on any battery operated device.
Battery Device Adapter
"DO IT YOURSELF" ENTRY --- PURPOSE: To adapt toys and small appliances for switch use. To make the device, separate the leads approximately one-half inch from both ends of the speaker wire using scissors or a knife. Using wire strippers or scissors, strip approximately one-quarter inch of the protective plastic insulator from each wire lead, being careful not to cut any of the wires. Unscrew the plastic case from the inline phone jack to expose two terminals with holes in them. Run the wire thro
Battery Interrupter
The Battery Interrupter is a battery interface control for toys designed to create switch compatibility for non-adapted toys for individuals with fine motor or physical disabilities. It is a cable that fits between any battery-operated toy or device and a switch, permitting the toy or device to be operated by the switch. It interrupts the power by inserting a disc between on of the batteries and the adjacent anode. There are two models available for battery sizes AA and AAA or C and D batteries.
Battery Interrupter Kit 2
The Battery Interrupter Kit 2 is a control input interface designed to enable individuals to adapt toys and other battery-operated devices for use with capability switches. This kit can be used to adapted battery-powered toys or devices equipped with a simple on/off switch. The kit includes one Jumbo Switch, one Gumball Switch, one Button Click Switch (switches also sold separately; see entries), three double-A battery interrupters, and three C and D battery interrupters. COLOR: The Jumbo Switch
Bib Kit (Model 3390)
Used for mounting a Model 3185 joystick for chin operation. The bib uses velcro straps to secure the bib around the neck and rib cage, and incorporates adjustable mounting harware to permit a wide range of joystick positioning.
Big Baby Button, The
The BIG Baby Button is a switch interface designed for use by babies and children with fine motor and upper extremity disabilities. This large button-style switch has a built-in switch interface to enable use of a computer with the switch. The large switch surface requires only a light touch for activation. COMPATIBILITY: Versions are available for use with IBM and compatible computers with serial or USB ports or for Macintosh computers with an ADB port. Also available is a cordless version for
Big Bend Clip
The Big Bend Clip is a bookholder, document holder, or switch mounting hardware designed for use by individuals with upper extremity disabilities. This device consists of an adjustable clamp base with an expandable gooseneck-style flexible arm attached to a large alligator clip. This unit can be clamped to the Convert-Able Table (see separate entry), a wheelchair tray, or other flat surface to hold books, toys, photographs, switches, and other items. Using two clips enables larger, heavier items
Big Buddy Switch
The Big Buddy Switch is designed for individuals with moderate to severe upper extremity or fine motor disabilities to make an appliance and computing accessible. Made for persons with moderate to severe upper extremity and motor disabilities, this switch features a 4.5 inch target area and can be activated with just 5.3 ounces of force. Auditory and tactile feedback.
BIG Candy Corn Proximity Sensor Switch
The AbleNet BIG Candy Corn Proximity Sensor Switch is a highly sensitive switch that is designed for users with upper extremity and other physical disabilities. The large wired proximity sensor switch activates with a simple wave of the hand or body movement over the switch top. It features an internal magnet for mounting or use two threaded inserts to mount, and auditory and visual feedback that can be turmed on or off.
Big Red Twist
The Big Red Twist offers an adaptive switch designed for people with neurological disabilities. The Big Red Twist has an activation surface with tactile and auditory feedback, but with a twist.
Blow Switch.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch activated by blowing on an index card attached to a battery device, intended to help a child develop breath control and blowing skills. This switch is made with a metal bandaid box, 3/16 inch wood dowel, two large paper clips, 12 inches of 24 gauge stranded wire, four inches of 2 conductor 22 gauge stranded wire and two index cards. Provides instructions and diagrams on cutting slots and holes in the box, soldering wire to the paper clips, and a
Blue2 Bluetooth Switch
The Blue2 Bluetooth Switch is a dual switch access to iDevices running iOS 7, Apple desktop or laptop computers running OS X Mavericks, and all switch accessible apps or software on iOS, OS X, Windows, and Android. It is designed to help people with severe physical or cognitive impairment. The switch is an assistive technology device that replaces the need to use a computer keyboard or a mouse.
Bluetooth Ihome
Bluetooth iHome is designed for use by individuals with fine motor, grasping and neurological disabilities. This device is equipped for wireless audio streaming. It works with any Bluetooth enabled device to allow listening to music and audio programs. It has been adapted with six 2 1/2" switches to control tracks forward and backward, increase and decrease the volume, pause and turn the device on/off. The iHome features a dynamic speaker for full range of sounds, dual alarm clocks, backlight LC
Brain Cap
---- PROTOTYPE --------- PURPOSE: To design a prototype an Electroencephalography (EEG) “brain cap” technology that allows an individual to transfer one’s thoughts into motion. Researchers at the University of Maryland have created a prototype “brain cap” that can transform thoughts into motion using brain signals captured from the cap’s EEG sensors that are attached to user's scalp. The computer connected to the brain cap reconstructs 3D hand movements so that one can control a computer’s curso
Bugzi
Bugzi is a powered indoor chair designed for children ages one to five whose mobility has been impaired by physical and neurological disabilities. It offers a unique opportunity for pre-school children with disabilities to experience independent mobility. Bugzi is an ideal introduction to switch and joystick use. It is compact and maneuverable. Each Bugzi is tailored and adapted to the individual child’s needs, with the capacity to adjust seating and controls as he or she grows. Bugzi is a
CameraMouse
The CameraMouse is software designed for use by individuals who do not have reliable control of a hand but who can move their head. This can be used by people with Cerebral Palsy, Spinal Muscular Atrophy, ALS, Multiple Sclerosis, Traumatic Brain Injury, various neurological disorders. The Camera Mouse is a free program that allows the user to control the mouse pointer on a Windows computer just by moving their head. Clicking can be done by making the mouse pointer dwell over a spot on the screen
Choice Switch Latch And Timer (Slat)
The Choice Switch and Latch Timer (SLAT) is a combination switch latch and switch timer designed to enable people with upper extremity disabilities to operate two switch-adapted games, toys or appliances. The unit enables one user to operate two items in sequence. The unit features two switch inputs, a timer, and control mode selection switch. The switch may operate as a latch switch, for timed seconds or minutes, with both appliances operating in the same mode. Once one item has been activated
Clickit! For Macintosh & Clickit! For Windows
ClickIt! is a mouse emulator program designed to provide access to Macintosh or Windows programs with IntelliKeys (see separate entry), switches, or the regular keyboard for individuals with physical, cognitive or visual disabilities. The program provides instant mouse-less access to menus, dialog boxes and scroll bars. It also allows custom overlays or switches to click on Hot Spots on the screen. Other features include automatically sending an overlay when launching a new program or when the s
Collar & Bridge Assembly (Model 32669)
The Collar & Bridge Assembly, model 32669, is a control switch accessory for mounting hardware designed to secure wheelchair controllers to the chair. The Collar allows a full range of motion while holding controllers such as joysticks and sip-n-puff goosenecks in a stationary position relative to the user. The Bridge Assembly includes plastic spacers to position the control unit at a proper distance from the collar. Pre-drilled holes on the front of the collar enable a variety of height adj
Connector Adapter Ca-1 (Model 4342)
The Connector adapter CA-1, model 4342, is a switch adapter designed to allow users to plug two single switches into a device with a stereo plug for individuals with physical disabilities.
Connector Adapter Ca-6 (Model 4354)
The Connector Adapter CA-6, model 4354, is a switch adapter designed to allow users to use one multiple switch with five devices that are each operated by a single switch for individuals with physical or cognitive disabilities.
Connector Adaptor Ca-2 (Model 4341)
The Connector Adapter CA-2, model 4341, is a switch adapter designed to allow users to use a dual switch with two devices that are each operated by a single switch for individuals with physical or cognitive disabilities.
Connector Adaptor Ca-4 (Model 4358)
The Connector Adapter CA-4, model 4358, is a switch adapter designed to allow users to use a dual switch with one device that is operated by a single switch for individuals with a physical or cognitive disability.
Control K'nex With a Mobile Phone
Control K'nex With a Mobile Phone is a Do It Yourself project designed for those individuals with neurological disabilities to create a phone-controlled set of K'nexs.
Crick Usb Switch Interface
The Crick USB Switch Interface is a computer switch adapter designed to make computers switch-operable for individuals with upper extremity disabilities or spinal cord injury. This switch interface works with almost all switch accessible software. It plugs directly into the computer's USB port and connecting switches. It will instantly work with Clicker, Cloze Pro, and All My Words 2 (not included) with no set up required. For other switch accessible software, this adapter comes with USB Keys, a
Daessy Mini Bent-Tube Mount (Model M75-Btm)
The DAESSY Mini Bent-Tube Mount, model M75-BTM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. This product also can be removed from the wheelchair when not needed. The frame clamp assembly includes a
Daessy Mini Folding Mount (Model M75-Fm)
The DAESSY Mini Folding Mount, model M75-FM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. The system folds the horizontal tube down to the outside. The folding joint between the two mount tubes brin
Delay Timer.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Delay timer allows switch to stay on for one to eleven seconds even if the switch is only activated briefly. A simple electronic circuit is constructed on a micro miniature prepunched perfboard and placed into a small box. Twenty-two gauge stranded wire is arranged on the perfboard and soldered into place. Resistors, 9 volt battery, electrolytic capacitor, audio transistor, potentiometer and mini relays are also soldered into place. The circuit board i
Dictaphone Switch For Use By A Paraplegic.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch adapter to allow operation of a dictaphone with a floor switch by a paraplegic typist. Describes a hand operated push-button switch designed to replace a foot operated rocker switch for a dictaphone machine. The switch includes a push-on push-off button and a single pole double throw momentary push button to control the rewind mode. COMMENTS: For further information contact: The Cerebral Palsy Research Foundation, Rehabilitation Engineering Cent
Dino-Games
DINO-GAMES are academic tutorial programs designed for individuals with a learning disability. DINO-DOT is a collection of sot-to-sot games which enhance number concepts, counting, sequencing skills, and spacial perception. Games can be selected using patterns of three, six, nine or twelve dots. The mode of play, difficulty level, auditory feedback and scan speed can be controlled manually. DINO-FIND is a game of concentration that stimulates memory and pattern recognition and provides scanning
DIY Jelly Bean-style Single Switch
DIY Jelly Bean-style Single Switch is designed for use by individuals with limited upper extremity mobility as a result of neurological involvement.
Diy Wii-Mote Modification
---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself rewired Wii remote to function using a switch witbigger buttons for individuals with disabilities. This DIY allows individuals with disabilities to use the Wiimote by not having to press the small buttons on the remote but rather use the buttons that have been rewired—A button, B button, the directional pad (up, down, left, right), and the home button. Step 1: Gather and set up soldering equipment. Step 2: Disassemble the W
Double Switch Box.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to permit two switches to be hooked up to a single toy or tape player so that a child has to do two things at once to turn it on. Instructions for building a double switch box using a small plastic jewel or watch box, 2 subminiature size jacks, one subminiature size plug, 4 feet of two conductor, 22 gauge stranded wire and 3 inches of single conductor, 22 gauge wire. Includes diagrams. SKILLS REQUIRED: Soldering. Electronics. AUTHOR: Burkhart, L
Dual-Lock
Dual-Lock is a surface anchor designed to mount switches and other devices to mounting plates or any other surface. When pressed together, this adhesive-backed strip provides a tough, secure bond. DIMENSIONS(W x L): 2 inches x 1 foot. WARRANTY: A manufacturer's warranty is available on this product.
Easel Switch
--- "DO IT YOURSELF" ENTRY ------- A switch mounted to the front surface of a Triwall easel and covered by a square plate of expanded PVC material to enlarge the switch surface.
Eneighbor Adl
eNeighbor ADL is an emergency alert system with monitoring service designed for use by seniors or individuals with disabilities who live in assisted living facilities. The system includes secure web portal access for staff and family to monitor the individual's activities of daily living (ADL). Each system is configurable and custom- designed to accomodate the needs of institutions. Small, wireless electronic sensors are placed in strategic areas of the assisted living residence. These sensors m
Extension Cables (Models 4333, 4335, & 4337)
Switch connector adapter for use with single switch with 1/8 inch miniature jack and plug, 6 feet long (model 4333); dual switch with 5 pin DIN jack and plug, 6 feet long (model 4335); multiple switch with 9 pin D jack and plug, 6 feet long (model 4337).
Extension Cord
The Extension Cord is a control switch accessory designed to allow more distance between the switch and the item being controlled. DIMENSIONS: The cord is 6 feet long.
Four Input Adapter (Model 3315)
Allows the use of four single switch actuators for mode selection and oeration of a Multipmode Interface. Each switch provides one of four directional commands (forward/reverse/left/right) required for system operation. The single switch type actuators used must normally be open, momentary contact switches with minature phone plugs.
Frankenkindle
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted electronic book reader for an individual with cerebral palsy. Glenn, an electrical engineer created the "Frankenkindle" for his sister using an Amazon Kindle and a keypad from a children's reader. This e-reader adaptation features controls that are easier for and individuals with cerebral palsy or other types of fine motor and neurological disabilities to use compared to the standard buttons on the Kindle. The device is mou
Friction Knob Universal Mounting Kit
The Friction Knob Universal Mounting Kit is designed for individuals with upper extremity and fine motor disabilities to allow them to securely place their assistive technology devices quickly and easily.
Gimpgear Ultra-Precision Usb Joystick Mouse & Pc Game Controller
The GimpGear Ultra-Precision USB Joystick Mouse and PC Game Controller is a joystick mouse interface designed for use by individuals with upper extremity or neurological disabilities or cerebral palsy. This digital joystick utilizes differential magnetic fields without any mechanical parts to provide smooth operation.
A sticky rubber joystick wrap prevents slipping. The user rests a hand passively over the teardrop shaped joystick handle for mouse pointer control. The unit has three large built-
Gooseneck Mounting System (Models 1550 & 1565)
The Gooseneck Mounting System is switch mounting hardware designed to enable control switches to be optimally positioned. Equipped with a flexible, extra-stiff gooseneck, the system can be attached to a table or wheelchair with the one-piece all-surface clamp or the switch (not included) can be attached to the circular plate w3ith the included dual-lock fastening strips. Model 1550 also has a locking swivel balljoint under the mounting plate for more precise angle adjustment. DIMENSIONS: The cir
H-31 Dual Button Box
The H-31 Dual Button Box is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a 2-switch adapted device. The user plugs the switch input of the device he or she wishes to control into the back of the Dual Button Box. One button on the Dual Button Box will "step scan" through the device's menu or options. When the user reaches the desired option or action, he or she
H-32 Switch Poser
The H-32 Switch Poser is a switch stand designed for use by individuals with neurological, fine motor, or upper extremity disabilities or cerebral palsy. This positioning stand has a base and a mounting surface on a flexible hinge. The base attaches to a smooth flat surface such as a tabletop through bottom suction. The switch (not included) attaches to the flat mounting surface with the included Super Velcro. Once attached, the switch can be adjusted to any angle from horizontal (flat) to verti
H-46 Scanover (Scanning Voiceover Switch Interface)
The H-46 ScanOver (Scanning VoiceOver Switch Interface) is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control an Apple iPad with a switch. This unit has a speaker and headphone jack, a front panel showing the status of the Bluetooth module inside, and a rear panel for the scanning options. The user turns VoiceOver on with triple click and starts scanning with either
H-68 Scan-5
The H-68 Scan-5 is a computer switch control interface designed to enable individuals with severe physical, motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, MP3 player, DVD player or switch-adapted toy/device with a switch. This stand-alone device can be used by a person that can operate one or two switches. The user plugs a switch-adapted remote control or device that he or she wishes to control into the Scan-5's 9-pi
H-69 Select-5
The H-69 Select-5 is a control input interface designed to enable individuals with severe physical, fine motor control, neurological or upper extremity disabilities or spinal cord injury to control a TV, Apple iPod, voice recorder, DVD player, MP3 player or a switch-adapted toy or appliance. This stand-alone device features 5 large round buttons: Power/play/pause; Advance forward or Channel up; Go backward or Channel down; Volume up; and Volume down. The user connects a device or remote control
H-70 Digital Switch Timer
The H-70 Digital Switch Timer is designed to enable individuals with upper extremity to control electronic switch-adapted devices such as CD/MP3/DVD players or universal TV remotes. The device functions as a connector between a switch and a switch-adapted device. The user hits the switch to start the song, program or video, and the device plays for the amount of time set on the switch timer. When the time on the timer switch expires, the device pauses and can restarted by the user by pressing th
Head Mounting Kit (Model A72)
The Head Mounting Kit, model A72, is switch mounting hardware designed for mounting the Plate Switch or L.T. Switch (see separate entries) on wheelchairs for use by persons with good head control. The kit includes a mounting plate, a right-angle tube, 13-inch flexible goosneck, push button disconnect, and a wheelchair clamp. The pushbutton disconnect is for quick removal of the unit from the wheelchair. Instructions are also included.
Head Switch Mounted To Existing Head Support
--- "DO IT YOURSELF" ENTRY ------- A head-switch mount which consists of a strip of expanded PVC that is formed so that it hooks around a head support. A Velcro strap connects the end of the head-switch mount. The switch is bolted to the mount.
PURPOSE: To stabilize a switch for activation by head movement.
MATERIALS USED: Expanded PVC material, 12 inch x 4 inch, Velcro loop tape (non-adhesive), 1 inch x 6 inch strip, Velcro pressure-sensitive hook tape, 1 inch x 4 inch strip, three ½ inch lon
Headrest Swing Away Bracket (Sm-Hrsa240)
The Headrest Swing Away Bracket, model SM-HRSA240, is switch mounting hardware designed for use by individuals who use wheelchair headrests. This arm attaches to any Stealth or Otto Bock style headrest (see entries). It is made ready to mount an egg switch or a sensor in a spot pad. Once adjusted in place the user can swing it away when it is not needed and push it back to the same spot when needed.
Headswitch Kit 1 (Model 1560)
The Headswitch Kit 1, model 1560, is a touch switch and switch mounting hardware package. HEADSWITCH: (Model 705) this switch (with cord) is activated with very light pressure from the head, but can also be activated by a knee, elbow, cheek, or other body part when mounted on a table or wheelchair. MOUNTING HARDWARE: The mounting hardware in the kit includes all necessary components: 1 universal swivel clamp, one 3/4 - 1/4 inch adapter, one 8-inch rod, one 18-inch rod, and one wheelchair clamp.
Headswitch Kit 2 (Model 1570)
The Headswitch Kit 2, model 1570, is a switch mounting hardware and touch switch package that includes all necessary components for the attachment of the switch to a table or flat surface. HEADSWITCH: Headswitch model 705 is a touch switch that can also be activated by very light pressure from the knee, elbow, cheek, or other body part. MOUNTING HARDWARE: 1 universal swivel clamp, one 3/4 - 1/4 inch adapter, one 8-inch rod, one 18-inch rod, and one surface mount clamp.
Headswitch Kit 3 (Model 1580)
The Headswitch Kit 3, model 1580, is a touch switch and switch mounting hardware package. HEADSWITCH: Headswitch (model 705) is a touch switch that can be activated with very light pressure from the head, knee, elbow, cheek, or other body part. 2 headswitches and cords are included in this kit. MOUNTING HARDWARE: Two 3/4 - 1/4 inch adapters, 1 flex mount, 8 assorted rods (4 pairs), 2 quick disconnects, 2 surface mount clamps, 2 wheelchair clamps, 4 universal swivel clamps, and 1 sturdy case with
Heavy-Duty Triangular Flange (Model 2002)
The Heavy-duty Triangular Flange, model 2002, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. The flange is a 5/8-inch 27 female connector.
Heavy-Duty Weighted Base (Model 2008)
The Heavy-duty Weighted Base, model 2008, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. DIMENSIONS: Six inches in diameter.
Hitch Computer Switch Interface
The Hitch Computer Switch interface is a switch adapter for computers designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This plug-and-play switch requires no software setup, making it immediately ready to deliver five sets of functions to as many as five switches at a time. Rows of functions are chosen with a single push of a button. This device can be used with switch-accessible software for single switch access or two-switch scanning. T
ILJA Gaze Interaction Game
ILJA Gaze Interaction Game features next generation active multi modal user interaction with active gaze control allowing the gamers to turn, jump, select weapons, and shoot by integrating the player’s gaze into targeting and directing actions. It is designed for use by users with limited motor control and strength in their upper and lower extremities associated with spinal cord injuries, stroke or muscular dystrophy. The game is powered by SMI's RED-n remote eye tracker. It was designed to
Intention Module (Model 565)
The Intention Module, model 565, is a control switch interface unit designed for use by persons with uncontrolled movements. When a capability switch is plugged into this module, sustained pressure is required before it activates a device. The module can be preset for a delay of from 1 to 12 seconds before it activates a device. The unit comes with a 0.13-inch plug. POWER: Uses 1 9-volt battery.
Interconnecting Adapters (Models 2022, 2023, & 2024)
The Interconnecting Adapters are switch mounting hardware designed to aid in attaching switches to wheelchairs or workstations. Model 2022 is a 0.25-inch 20 stud adapter. Model 2023 is a 5/8-inch internal adapter woth 0.25-inch 20 bushing. Model 2024 is 5/8-inch 27 bushing tube adapter.
iPad Wireless Switch Interface
iPad Wireless Switch Interface is designed for use by individuals with limited upper extremity strength and coordination as a result of cerebral palsy, traumatic brain injury, or stroke. It allows the user’s switches to be connected to access and control hundreds of compatible apps on their Bluetooth-equipped iPad, iPhone, iPod Touch, MAC, PC or Android device. (A chart of switch accessible apps is available free on the manufacturers website.) This switch interface now has six modes for additi
iPad/iPod/Smartphone/Tablet Cordless Music Box With Switch Inputs
iPad/Tablet Switch Interface (H-66)
The iPad/Tablet Switch Interface (H-66) is a Bluetooth Switch Interface (BSI) for the iPad and tablets allows 1-2 switches to control 'switch-friendly' apps and some global aspects of an iPad for use by individuals with severe physical disabilities. Switch-friendly apps are those written by developers in the Assistive Technology or AAC field, and are 'looking' for specific signals that my BSI transmits (space/enter). There are about 80 switch-friendly apps.
Iscanmp3
The iScanMP3 is a scanning control for an MP3 player designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. Plugging a capability switch (required but not included) into the iScanMP3 adapter and connecting an Apple iPod, iPod Photo, or iPod Mini enables the user to scan through iPod functions: play, pause, forward and back through a play list, and volume up and down. The scanning speed is adjustable. DIMENSIONS(LxWxH): 3 5/8 x 1.75 x 0.5 inche
J-Pad
J-Pad is a unique, highly intuitive joystick interface providing comprehensive switch access to all iPad functions - including Apps, music & media, iBooks, still & video photography, on-screen keyboard entry and more. Connecting wirelessly to the iPad using Bluetooth 2.1, J-Pad is simple to set-up and easy to use with touch sensitive buttons to launch and close Apps. Provided are two sockets to connect up to two wired switches. POWER: Rechargeable battery (included) + USB. COMPATIBILITY:
Jelly Beamer Twist Transmitter With Original Receiver
The Jelly Beamer Twist Transmitter With Original Receiver is designed for those individuals with fine motor and neurological disabilities to provide them the independence to turn on the computer or in cooking activities. A wireless switch that is rugged, reliable and easy to use. The Jelly Beamer wireless switch features a power-saving sleep mode that dramatically extends its battery life yet is virtually undetectable to users. Tactile, visual and audible feedback.
Joybox
JoyBox is a switch input adaptor designed for use by individuals who use switches. This device enables the user to play arcade-style games or operate a mouse with up to eight switches. This USB switch box works with most switch software, including Writing with Symbols, Clicker 4, and The Grid from Sensory Software (see entries). When this plug-and-play device is connected to the USB port on a personal computer (PC), it is recognized by Microsoft Windows as a Game Controller or Joystick without
Joycable
JoyCable is a switch input interface designed for use by individuals who use switches. This device enables the user to play arcade-style games such as Midtown Madness or Motocross Madness with two switches (for example, a pair of head switches). This USB switch box works with most switch software, including Writing with Symbols, Clicker 4, and The Grid from Sensory Software (see entry). When this plug- and-play device is connected to the USB port on a personal computer (PC), it is recognized by
Joystick Replacer Box
The Joystick Replacer Box is a control input interface that allows up to five switches to act in place of a joystick for a Commodore 64, 128, or VIC-20. If all five switches are used, pressing each one corresponds to up, down, left, right, and "fire" on the joystick. The Joystick replacer box with switches can operate any software designed to be operated with a joystick on these computers. A short program is provided which will control the 64-Talker or the VIC-Talker speech synthesizers. A speci
Jumbo Remote Control (Model 1526)
The Jumbo Remote Control, model 1526, is a remote control for television, DVD players, and VCRs, designed for use by individuals with fine motor, severe physical, or upper extremity disabilities or low vision. This all-in-one remote control allows the user to control TV, VCR, DVD, cable, PVR, and satellite receivers by pressing large buttons that are very sensitive to touch and which have different colors for different group functions. It will also control the latest Flat Screen TV's. The unit a
Labac Mounting Kit (Model 3515)
Used for mounting a head operated actuator to the back of a Labac recliner. The mounting kit consists of a mounting bar with a stop clamp, a C-mounting rod, and a rod clamp to join the mounting rod to the mounting bar. Permits the actuator to be removed from the recliner, and returned to its original position without the need to readjust the mounting.
Large Area Flap Switch To Control Battery-Operated Toys.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Simple to operate switch to modify a battery operated toy so it can be used by a disabled child. Describes a large area push switch as a modification of the on- off switch for a toy. It consists of two pieces of plywood hinged together on one side with a simple contact switch or microswitch between them, and a strip of self-adhesive open cell foam tape keeping the top board from touching the bottom, thus activating the switch, unless it is pressed down
Lifebreath Switch (Model 1062)
The LifeBreath Switch, model 1062, is a pneumatic switch designed for use by individuals with upper extremity and other physical disabilities. Gently blowing into the switch activates attached external devices. The switch is attached to a gooseneck with a universal clamp. This switch operates in latch, momentary, or timer mode. The timer adjusts from zero to two minutes. POWER: Uses nine-volt direct current. DIMENSIONS: The gooseneck is 19 inches long.
Linkswitch (Model Dlt-202)
The LinkSwitch, model DLT-202, is a control switch interface designed to activate battery operated assistive devices with additional switches for individuals with limited movement or motor control. The user plugs a Taction Pad (see separate entry) or any other switch into the LinkSwitch using a standard 1/8-inch jack, then touches the Taction Pad to activate adapted toys, keyboard interfaces, tape recorders, battery interrupters, sensory stimulus devices, or any other battery-operated device. Th
Mac Switch Interface
The Mac Switch Interface is a control input interface designed to permit switch control of a Macintosh computer. This plug-and-play unit plugs directly into the ADB connector on the Macintosh keyboard and enables up to five switches to be connected. No software setup is required and the unit is compatible with any switch-ready program.
Magic Arm Mounting System (Model 1631)
The Magic Arm Mounting System is mounting hardware for control switches to be placed in virtually any position for individuals with physical disabilities. The adjustable arm attaches to a table or wheelchair by means of a one-piece base clamp. The arm can be further adjusted by flipping the lever at the joint of the arm, moving the arm into the desired position, and then flipping the lever back to lock it in place. The Magic Arm Mounting System comes with threaded circular and rectangular platfo
Makey Makey
Makey Makey is a method to turn almost any object into a computer recognized switch. Ideal for individuals with fine motor and upper extremity disabilities. Alligator Clip two objects to the MaKey MaKey board. When the user touches the item the user wants to use as a switch, the computer makes a connection, and MaKey MaKey sends the computer a keyboard message. The computer just thinks MaKey MaKey is a regular keyboard (or mouse). Therefore it works with all programs and webpages, because all p
Male 1/8 To Female 1/4 Adapter & Male 1/4 To Female 1/8 Adapter
The Male 1/8 to Female 1/4 adapter and the Male 1/4 to Female 1/8 Adapter are switch adapters designed to ensure compatibility between switches and switch-adapted toys and appliance. One end features a plug and the other end is equipped with a jack.
Mcm 1.0 Qs
MCM 1.0 QS is designed to aid in mounting and positioning switches on wheelchairs and workstations for individuals with limited fine motor or upper extremity disabilities due to spinal cord injuries or neurological impairments such as cerebral palsy, stroke or traumatic brain injuries. The Quickshift (QS) version has “ratchet-style“ handles at its joints to quickly adjust its position without the use of tools. A round frame clamp is included. Button adapter sold separately.
COLOR: Black.
WARRAN
Microphone Tubing (Series 2000)
The Microphone Tubing, series 2000, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. Available models include 5/8-inch 27 male to male, 5/8-inch 27 male one end, flex tube (gooseneck) 5/8-inch 27 male and female, 45-degree angle tube 5/8-inch 27 male and female, or 90-degree angle tube 5/8-inch 27 male and female. DIMENSIONS: The 5/8-inch 27 male to male is sold in three-, six-, or 12-inch lengths. The 5/8-inch 27 male one end is sold in 21-inch
Midline Joystick Mounting Bracket
The Midline Joystick Mounting Bracket is a powered wheelchair controller bracket designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This bracket enables the user to place a wheelchair joystick from the severe left or right to midline. This mounting bracket also allows the joystick to be flipped out of the way for transfers or when not in use.
Mighty Mount
The Mighty Mount is switch mouting hardware designed to optimally position a single switch for a user with physical disabilities. This unit may be used with most popular switches and includes an anchoring clamp, a telescoping and angling arm, and a full range switch platform. Swiches attach using screws or Velcro and can be positioned for use with the hand, the chin, or the knee.
Mini Beamer Transmitter And Receiver
Mini Beamer Transmitter & Receiver is designed to provide wireless switch access for individuals with physical and cognitive disabilities. The Mini Beamer Transmitter & Receiver includes a rechargeable battery, proximity sensor activation surface and an external switch jack. The proximity sensor of the Mini Beamer Transmitter will activate when an individual is within 10-millimeter of the activation surface. It requires the Mini Beamer, Original or SLAT receiver. The Mini Beamer receiver
Modularhose.com Assistive Technology Double Kit (Model 90655)
The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of
Modularhose.com Assistive Technology Double Spring Clamp Kit (Model 90674)
The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plat
Modularhose.com Assistive Technology Kit (Model 90650)
The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Li
Modularhose.com Assistive Technology Kit Plus (Model 90652)
The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of L
Modularhose.com Assistive Technology Kit With Two Plates (Model 90654)
The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes
Modularhose.com Assistive Technology Spring Clamp Kit (Model 90673)
The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75
Modularhose.com At Starter Kit (Model 90680)
The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive tec
Modularhose.com Round Tube Clamp Kit (Model 90750)
The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket f
Modularhose.com Spring Clamp Kit With Plate 1 Foot (Model 90665)
The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a
Modularhose.com Spring Clamp Kit With Plate 2 Feet (Model 90667)
The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a
Mother's 3Rd Arm With Pillow Switch
Mother’s Third Arm with Pillow Switch is an adjustable arm with a switch attachment that can be used by children and adults with limited arm strength and mobility. The Mother’s Third Arm can be clapped to any surface up to 2½ inches thick while the Pillow Switch can be adjusted to accommodate the user’s needs. It can be attached to wheelchairs, tabletops, strollers or chairs.
Mounting Plates
Mounting Plates are switch mounting hardware designed to attach AbleNet switches, other control switches, clipboards, craft projects, book stands, cameras, toys and games, and other items to the Universal Switch Mounting System or the Slim Armstrong Mounting System (see separate entries). Available models include the Small Triangular Plate for the Jelly Bean Switch, LITTLEmack/LITTLE Step-by-Step, and Step-by-Step with levels, the Large Triangular Switch for the Big Red Switch, Cordless Big Red
Mounting Switch Mount (Model A73)
The Mounting Switch Mount, model A73, is switch mounting hardware for the Mounting Switch (see separate entry). This mount is lgihtweight and permanent, designed for placement on a wheelchair for an individual user. The mounting kit includes a 1/4-inch mounting rod, and a wheelchair clamp with a 1/4-inch rod adapter. Instruction included.
Mouser 3 Switch Box
The Mouser 3 Switch Box is a switch adapter for computer designed for use by individuals with fine motor and upper extremity disabilities. It allows unwanted mouse buttons to be turned off and operated instead from a switch. With this product, mouse-click software can be accessed with a switch. This product has two PS2 mouse sockets allowing the mouse and another device such as a joystick to be used together, with automatic switching between the mouse sockets.
Movement Sensor Switch (Model 655)
The Movement Sensor Switch, model 655, is a motion detection switch designed for use by individuals with upper extremity and other physical disabilities. This switch operates in momentary, latched, or timer mode and activates the attached toy or appliance with the slightest movement in front of the sensor.
MP3 Music Box w/Buttons AND Switch Inputs
The MP3 Music Box w/Buttons AND Switch Inputs is an adapted music box to be used by individuals with severe physical and cognitive disabilities during therapeutic recreation to control their own music. Using a simple MP3 Player, adapted to 2 or 3 large accessible buttons, a JBL speaker, and switch inputs, the user can load hundreds of songs, audiobooks, podcasts, and other audio onto the Player's removable storage. The user can use their buttons or switches to step through their songs, listening
Multi-Scan
Multi-SCAN is a single switch activity center designed for individuals who have alearning disability and are limited to the use of a single switch. It features the four educational DINO-GAMES (see separate entry) in one complete package. On top of that there are five fraphic libraries appropriate for a wide range of ages and abilities. The catagories include Animals, Cosmetology, Independent Living, Sports and Vocations. Multi-SCAN allows you to select a graphic library, choose games and set a s
Multimode Interface (Model 3420)
Permits the use of proportional or switch actuators to operate an Everest & Jennings power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, acceleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching (continuous) whee
Multimode Interface (Model 3470)
Permits the use of proportional or switch actuators to operate a Quickie power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, accleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching ( continuous) wheelchair drive. Tw
Multimode Scanner (Model 3370) & Scanner Display (Model 2995)
The Scanner, in conjunction with a single switch actuator, is used for mode selection and operation of a Multimode Interface. The Scanner converts single switch actuator commands into the four directional commands (forward/reverse/left/right) required for system operation.
Multiple Switch Box
The Multiple Switch Box is an alternative game port socket designed to work with the Adaptive Firmware Card or Ke:nx (each sold separately; see entries) to permit connection of up to eight switches to the computer as direct-selection input devices. Each switch is defined as a character, talking word, or special action. This device may be ideal for group activities where each participant has an opportunity to independently activate the computer with a switch. COMPATIBILITY: For use with Apple II
Multiswitch Module (Model 575, 575-8)
The Multiswitch Module is a switch adapter which allows several switches to be connected to the same switch-operated device (such as a toy) designed to encourage group participation for individuals with physical, sensory or cognitive disabilities. Which of the switches controls the toy is determined by the setting of toggle switches on top of the module. The module has four jacks for plugging in switches and one output plug for connecting to the toy. The plug can also be connected to a computer
Ne-At Switch Divider
The NE-AT Switch Divider is a control switch input interface that allows the user to activate up to five devices with a single switch. The Input switch can be any standard special needs switch such as aa Zygo Lever switch, a Spec switch, or a Buddy Button (see separate entries).
Ne-At Switch Multiplier
The NE-AT Switch Multiplier is a control switch input interface designed to allow up to five switches to control a single device. The input switches can be of different types, or they can be the same type. Input switches can be any standard special needs switch such as aa Zygo Lever switch, a Spec switch, or a Buddy Button (see separate entries). Any one of the input switches connected through the Switch Multiplier activates the device. The Switch Multiplier can be used with such devices as a po
Nerf Ball Switch
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To enable a student to operate a battery-operated toy or battery-operated appliance using a single switch. Some student prefer the textured surface of the Nerf ball, and it requires only gross movements of the arm or hand to activate it.
New Blue 2
The NEW Blue 2 is a switch designed for individualists with dexterity or mobility issues. The NEW Blue2 switch provides a sleek, modern design with new features that make it compatible with all switch accessible apps. Also new to Blue2 is the ability to toggle the on-screen keyboard on and off for iOS devices and a built-in rechargeable battery.Includes rechargeable battery.Requires 40% less pressure to activate than the original Blue2.
Features two external switch jacks. Program custom keystrok
New Magic Arm Mounting System (Model 5050)
The New Magic Arm Mounting System, model 5050, is switch mounting hardware designed to mount switches or communication boards to a wheelchair, table, or bed frame. The adjustable arm attaches to a table or wheelchair by means of a one-piece base clamp. The arm can be further adjusted by flipping the lever at the joint of the arm, moving the arm into the desired position, and then flipping the lever back to lock it in place. The System comes with threaded circular and rectangular platforms that a
Nine Volt Battery Adaptor Module (Model 630, 630-8)
Nine Volt Battery Adaptor Module, model 630 and 630-8, is a device that allows a single switch to be used to control any device powered by a nine-volt transistor battery for individuals with a physical disability. The switch is plugged into a jack on the Adaptor Module. A special plug wired to the Adaptor Module connects between the battery contacts in the device and the battery itself. When the switch is activated the battery connection is completed and the device is turned on. When the switch
Nine Volt Toy Adapter.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapter for use with toys or other devices requiring a 9 volt battery. Adapter is constructed using two volt battery snaps and a subminiature jack. To use adapter, snap battery into one pair of snaps and attach the other side into the toy. Turn the on/off switch on the toy to the on position. Plug any switch into the jack. Switch should activate the toy. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: More Homemade Battery Devices for Severely
Nintendo Interface Module & Super Nintendo Interface Module (Model 611, 611-8, 614, 614-8)
The Nintendo and Super Nintendo Interface Modules, model 611 and 611-8, 614, 614-8, are control switch interface units designed for use with the Nintendo or Super Nintendo Entertainment System for individuals who are physically impaired. The units can be used with up to 8 external capability switches. The modules feature top mounted push buttons which can be used to override the actions of the external capability switches (by a teacher or therapist, for example).
No Noise Switch (Model 3Nssw)
The No Noise Switch, model 3NSSW, is a control switch interface unit designed for use with individuals with emotional or cognitive disabilities. This switch activates the connected toy or appliance as a reward for quiet, encouraging those who shout or scream to modify behavior. This unit includes a microphone and a sensitivity control.
On/off Module (Model 581)
The On/Off Module, module 581, is a switch adapter designed for use by individuals with upper extremity disabilities. When this module is connected between a switch-adapted device and two switches (not included), the module enables one switch to turn the device on and the second to turn the device off. The module is equipped with a combination 0.25-inch and 1/8-inch plug.
Oval Texture Switch With Battery Interrupter (Model 711-I)
The Oval Texture Switch with Battery Interrupter, model 711-I, is a switch adapter and touch switch designed for use by individuals with severe physical or upper extremity disabilities. Two battery interrupters (C, D and double-A) are permanently attached to a medium size Oval Texture Switch (see separate entry). The oval-shaped switch is brightly colored and textured. Slip the thin disk into a battery-operated toy or device and it becomes switch adapted. DIMENSIONS: 9 inch diameter.
Pad Mounts For Sensors (Models Sm-Sp, Sm-Mp, & Sm-Lp)
Mounts for Sensor Pads are switch mounting hardware designed for use by individuals with severe physical disabilities or spinal cord injury. These pad can be used to mount non-adjustable sensors (sold separately) and maintain a range of touch to 0.25-inch above the surface. SIZES: Spot, medium, and long. DIMENSIONS(WxL): The spot pad is 2 x 2 inches, the medium pad is 2 x 4 inches, and the long pad is 2 x 6 inches.
Paddle Panel
The Paddle Panel is a replacement for hand-held game paddle devices designed to allow better control as well as bilateral manipulation activities. Paddle Panel has two buttons and two knob controls, and plugs directly into the game I/O port on the back of the computer. COMPATIBILITY: For use on Apple IIc, Apple IIe, IBM PC, and Atari computers.
Pagebot For Kindle 2
The PageBot for Kindle 2 is a switch interface for the Amazon Kindle 2 electronic book reader designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon's 2nd Generation Kindle, including both the domestic (U.S.) wireless and international wireless models
Pagebot For Kindle Dx
The PageBot for Kindle DX is a switch interface for the Amazon Kindle eBook reader, designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon’s Kindle DX, including both of the original white models. It enable individuals who cannot hold the Kindle or pr
Pagebot For Kindle Keyboard
The PageBot for Kindle Keyboard is a control switch interface for the Amazon Kindle electronic book reader, designed for use by individuals with neurological disabilities, spinal cord injury, amyotrophic lateral sclerosis (ALS), cerebral palsy, muscular dystrophy, spinal muscular atrophy, multiple sclerosis, stroke, arthritis, or repetitive strain injury. This switch interface works with all models of Amazon’s 3rd Generation Kindle, including the international wireless, WiFi, and Special Offer m
Pal Pad Assistive Switches
The Pal Pad Assistive Switches are assistive devices to turn on any switch activated devices by touching them.
Pal Pads Switches
Pc Switch Interface
The PC Switch Interface is a control switch interface unit designed to support multiple switches and switch-ready computer programs. The unit allows the user to connect up to five switches and is designed to plug into the computer serial port. Four different configurations are offered; to switch between setups, the user presses a function key. COMPATIBILTY: For use on IBM and compatible computers.
Pc Switch Interface
The PC Switch Interface is a control input interface designed to permit switch control of a personal computer (PC). This plug-and-play unit plugs directly into any unused serial port and enables up to five switches to be connected. Four different configurations are available and can be accessed by pressing a function key. No software setup is required and the unit is compatible with any switch-ready program.
Pigtail Adapter
The PigTail Adapter is a switch adapter designed to allow connections between incompatible switch and appliance plugs. The adapters available include 1/8 to 1/4 or 3/32 inches; 1/4 inch to 1/8 or 3/32 inches; and 3/32 inches to 1/8 or 1/4 inches.
Plate Switch
The Plate Switch is a pressure switch designed to create computer access for individuals with a physical disability. This general purpose switch requires three ounces of pressure to activate and can be used with a chin or head mount. A "click" sound provides auditory feedback. Rubber feet make the switch ideal for desktop use. The switch comes with a black 69 inch cable and 3.5 millimeter plugs at either end. DIMENSIONS: Switch measures 3-7/8 x 2 x 1-1/8 inches. Jack size is 3.5 millimeters. COL
Plug Adapters (Models 1160, 1170, & 1190)
Plug Adapters are switch adapters that allow different sized plugs and jacks to be compatible. There are three different adapters available: model 1160 converts 1/8-inch female to 1/4-inch male; model 1170 converts 1/4-inch female to 1/8-inch male; and model 1190 converts 3/32-inch female to 1/8- inch male.
Powerlink 4 Control Unit
The PowerLink 4 Control Unit is a control switch interface unit designed for use by individuals with upper extremity or neurological disabilities or cerebral palsy. This unit enables switch users to control up to two electrical appliances with single switches. Six modes of control allow the user to define exactly how, and for how long, appliances will be turned on. The unit accepts any single switch, including AbleNet’s Big or Jelly Beamer wireless switches (see separate entries). The unit is se
PowerLink4 Control Unit
The PowerLink®4 Control Unit is a switch designed to turn on up to two devices. The PowerLink® 4 control unit allows switch users to control up to two electrical appliances with single switches. Six unique modes of control allow the user to define exactly how, and for how long, appliances will be turned on. PowerLink® will accept any single switch, including the Big or Jelly Beamer wireless switches.
Profiler-Lite Mounting System
The Profiler-Lite Mounting System is a wheelchair mounting kit for communicators or switch mounting hardware. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables with square, oblong, or round tubing. This system accommodates lightweight communicators and most switches and supports up to five pounds, including pressure on the device. The unit can be mounted on the right or the left side and the universal base mount can be adjusted 360 degrees from front to back and 180
Push Button Heater Control Aid
CUSTOM ADAPTATION PURPOSE: To enable an individual with rheumatoid arthritis to operate the lighting controls of a space heater. In order to light the space heater, two recessed buttons needed to be depressed simultaneously and held for several seconds. A tool was fashioned from the handles cut from a stroller. A wooden block with a slightly rounded end was glued into each handle. The user blaces the rounded blocks against the buttons while grasping the handles and using her body weight to pres
Push On / Push Off
The Push On / Push Off Switch is a switch latch designed for use by individuals with upper extremity disabilities. Pressing the plate surface once activates the device connected to the switch and it will remain activated until the plate is pressed again. This switch is equipped with a 1/8th-inch jack. DIMENSIONS: 3 x 5 inches.
Push On/push Off Module (Model 580, 580-8)
The Push On/Push Off Module is a switch adapter designed to take momentary input from a single switch and converts it to latched on/off output for a switch operated device. Activating the switch once will turn the toy or device on. It remains on until the switch is activated again. POWER: Two "D" batteries. DIMENSIONS: 6.3 x 3.8 x 2.2 inches. WEIGHT: 14 ounces.
Quick Connector "and Module" (Model 610)
The Quick Connector "And Module", model 610, is a control switch interface unit designed to connect two switches with a toy or device for individuals with physical disabilities. Both switches must be activated simultaneously for the device to operate. One user may activate both switches, or two users may activate the switches cooperatively. The unit is equipped with a combination 0.25-inch and 1/8-inch plug.
Quick Disconnect (Models 2005, 2006, & 2032)
Quick Disconnects are switch mounting hardware that allows an entire switch mounting assembly to be removed and re-installed on a wheelchair without repositioning it. To use the quick disconnects, the user simply bends the rod to the desired position and then is able to remove and reinstall the switch without having to reposition the rod. With two units, one headswitch assembly can be quickly transferred to another wheelchair. Model 2032 is a clamp and rod assembly. Model 2005 is a push-button 5
Rhythm Generator (Model 590, 590-8)
Rhythm Generator, model 590 and 590-8, is a switch adapter designed to control the rate of the rhythm of switches for individuals with physical disabilities. The Rhythm Generator is connected between the switch and the toy. When the switch is activated, the musical toy turns on and off in a regular rhythm. When the switch is released the toy stays off. The speed of the rhythm is adjustable by simply turning a knob.
Rod Adapters (Models 2070, 2071, & 2072)
The Rod Adapters are switch mounting hardware designed to aid in attaching switches to wheelchairs or workstations. Model 2070 is 0.25-inch to 3/8-inch rod to 0.25-inch 20 F thread. Model 2071 is 3/8-inch to 0.5-inch rod to 0.25 20 F thread. Model 2072 is 0.5-inch to 5/8-inch rod to 0.25-inch 20 F thread.
Round Flange (Model 2003)
Round Flange, model 2003, is switch mounting hardware designed to aid in attaching switches to wheelchairs and workstations. This flange is 5/8-inch 27 female. DIMENSIONS: The base is 1.75 inches in diameter.
Sam (Switch-Adapted Mouse) Trackball
SAM is designed to provide adapted computer access for individuals with upper extremity disabilities. These modified pointing devices are designed for both "Adaptive" and "Non-Adaptive" software applications. The switch is a substitute for the track ball and can be operated with various parts of the body, such as hands, feet, knees, elbows, head, etc. It serves as a switch interface for special software "looking" for the mouse-click as single switch; and allows cooperative control of conventiona
Samsung SmartThings App
The Samsung SmartThings app is a mobile app that links users to their Samsung SmartThings Hub and all of its connected devices, allowing them to monitor, control, and secure their home from anywhere (the SmartThings Hub does not come with the app; the hub and all other connected devices must be purchased separately). Through the Samsung SmartThings app, users can remotely turn compatible smart home devices on or off, receive notifications and alerts, program automated schedules, customize settin
Samsung SmartThings Hub
The Samsung SmartThings Hub is a centralized unit that wirelessly connects compatible smart home devices and allows users to monitor and manage these devices from anywhere using the Samsung SmartThings app (not included, please see separate entry). Plug the hub into a wall outlet, connect the included Ethernet cable to the internet router, and then download the free Samsung SmartThings app to an iOS or Android device. Through the app, the user will be able to personalize his or her settings, mon
Scanning Aid.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to evaluate a person's optimal ability to operate a scanning device. A simple adapter unit provides access to many commercially available switches. The user can compare the use a wide selection of switches. The device can scan in three modes: step scan, directed scan, or latching scan. Speed can be adjusted. the evaluation device has five display panels to scan through during each evaluation session. Plexiglass cover can be removed to change ite
Sensitrac Flat Pad
The Sensitrac Flat Pad is a suction pad mounting system designed for use by individuals with spinal cord injury or neurological disabilities, upper extremity disabilities, or fine motor disabilities. This micro pad can be used to hold ABLENet switches, buttons, touch pads and small communication devices up to 6 inches wide with flat bottoms. It can also be used to stop devices from moving when a user with uncontrolled movement hits the device. The pad consists of a hard plastic cover with Velcro
Sensitrac Flat Pad With 180 Degree Flipper Arm
The Sensitrac Flat Pad with 180 Degree Flipper Arm is a suction pad system with an adjustable angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed to hold switches and lightweight devices that require vertical mounting for better access. This mount can accommodate devices up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 180 degrees front to back. The d
Sensitrac Flat Pad With 360 Degree Angle Adjustable Arm
The Sensitrac Flat Pad with 360 Degree Angle Adjustable Arm is a suction pad system with an adjustable-angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed for switches and lightweight devices that require multiple positioning angles for better access. It can hold devices measuring up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 360 degrees around and
Sensor Switch Kit (Model 1066)
The Sensor Switch Kit, model 1066, is a motion detection switch designed for use by individuals with upper extremity and physical disabilities. This switch can be used to operate one or two devices and allows the sensors to be placed where the user has the most control. The sensitivity of the switch can be adjusted to increase or decrease the amount of movement required for switch activation. A light and audible tone provide feedback when a switch closure is made. This switch operates in momenta
Series Adapter
The Series Adapter is a double touch switch designed for use by individuals with upper extremity disabilities. This switch requires simultaneous activation of both switches to operate any battery-powered device or electrical appliance. The adapter may be used to encourage cooperative interaction between two individuals; reinforce the simultaneous use of two different motor movements (e.g. bilateral hand activity); or to provide adult-controlled reinforcement. DIMENSIONS: 8 inches long. WEIGHT: 1
Simplyworks For Ipad
SimplyWorks for iPad is a Bluetooth Switch Interface designed for advanced switch users who wish to use the main features of Apple devices and access iBooks. It allows the users to access the home screen, adapted apps and iBooks. Icons or items on the home screen and within most main apps are scanned with a highlight box. Automatic scanning can be conducted with one, two or three switches. Step scanning can be achieved with four switches. There are four scanning speeds. Full access to iBooks req
Single Switch Latch And Timer (Slat)
The Single Switch Latch and Timer (SLAT) is a combination switch latch and switch timer unit designed to enable individuals with upper extremity disabilities to control one battery-operated toy, game, or appliance. This unit offers a choice of functions: In switch latch mode, one touch activates the device and the next turns it off. In timer mode, the timer can be set to activate the device for a set number of seconds or minutes. When the time on the timer expires, the device turns off.
Sip And Puff System
The Sip & Puff System is a pneumatic control switch interface unit designed for use by individuals with neurological, upper extremity or severe physical disabilities, amputation, cerebral palsy, or quadriplegia. The system has a breath delivery system and a controller. The breath delivery system has a quick disconnect design with a small flexible gooseneck that may be adjusted to any position to be within easy reach of the user's mouth. This system will interface with all wheelchairs and to
SLAT Receiver
SLAT Receiver is a a Switch Latch and Timer (SLAT) that allows the user to plug the 1/8-inch/3.5-millimeter mono switch plug into a device and pair with a wireless switch transmitter to begin using. Includes four modes of control: Direct, Timed Seconds, Timed Minutes, and Latch.
Smyle Mouse - Camera based Head Mouse, Face Tracker and Clicker
The Smyle Mouse software is a head mouse, face gesture tracker and clicker for controlling a Windows computer using a webcam. The software is easy to use and responsive mouse control including pixel perfect mouse pointing, clicking (left, right, double), scrolling, and dragging in a completely hands-free and voice-free. The user's facial expressions are captured by a webcam that may be part of the user’s laptop or tablet. No specialized or infra-red cameras required. No dots on the forehead, no
Softline Collar & Bridge Kit (Model 32685)
The Softline Collar & Bridge Kit, model 32685, is a control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The device includes a breastplate with a bridge assembly, including plastic spacers to help position the control unit at the proper distance from the breastplate. The kit is designed to be configured and attached in any way that best suits the user with any or all of the following included pieces: 2 trimable hook-n-loop straps, 4
Special Switch Mounting Kit (Model 2100)
The Special Switch Mounting Kit, model 2100, is switch mounting hardware designed to aid in mounting and positioning switches on workstations and wheelchairs. This kit includes a Wheelchair Mounting Clamp with Rod, two microphone tubes, a Circular Switch Mounting Plate, a Rectangular Switch Mounting Plate, and three lengths of gooseneck (see separate entry). DIMENSIONS: The Rod is 3/8 inch in diameter x 18 inches long. The microphone tubes are 5/8 inch in diameter x 6 inches long. The gooseneck
Sport EZ Talking Watch
The Sport EZ Talking Watch is a watch featuring an analog and digital face that is designed for people who are blind, visually impaired, or who have low vision to tell time. The talking watch is water-resistant which means it can withstand incidental contact with water. Features include an hourly chime, alarm with snooze, and seconds hand. The analog face has silver numbers on a black background as well as small digital window.
Ss-Access!
The SS-ACCESS! is a single switch keyboard modification program designed for individuals with little or no hand mobility or strength. Simply plug the interface cable into the PC's serial port, plug the switch into the interface, run the support software and run the single switch software. A user-defined keyboard character is sent to the single switch application each time the user presses the switch. The package includes the switch interface, the support software, SS-DEMO game and an easy to fol
Stay Put Easel (Model 1484)
The Stay Put Easel, model 1484, is an easel designed for use with individuals with emotional or neurological disabilities. A switch, communicator, toy, or other device is secured to the easel or plate with duolock (extra-strong Velcro) and the easel is clamped to a lap tray or table to prevent the user from throwing the device. OPTIONS: Sets of C-clamps are available separately. DIMENSIONS (LxWxH): 13 x 12 x 10.5 inches.
Stealth Ultra Headrest (Model Sm-Su200)
The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad.
Stereo Headphones with Ear Cushions and Volume Control
The Stereo Headphones with Ear Cushions and Volume Control are headphones designed for use by hard of hearing individuals to serve entertainment purposes. These lightweight, fully adjustable stereo headphones feature leather-like ear cushions that sit on top of the ear, a standard 3.5 millimeter plug, and a volume control. User can use these headphones with APH technology products, such as Orion Calculators, Book Port Plus, Book Port DT, Joy Player, and others.
Surelock Midline Swingaway System (Model 32691)
The Surelock Midline Swingaway System, model 32691, is a lightweight control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The entire system is can be mounted to either the right or left vertical bar of a wheelchair with 7/8-inch frame tubing, or it can be mounted on either the back post or armrest of a wheelchair or connected to a multimount chair with a multimount adaptor clamp. An inner extension bar and outer extension tube allow fo
Surface Mounting Clamp (Model 1610)
The Surface Mounting Clamp (model 1610) is switch mounting hardware designed to allow devices with 3/4-inch diameters to be clamped to flat surfaces such as wheelchair trays, table tops, etc.
Swifty Usb Switch Interface
The Swifty USB Switch Interface is a switch interface designed to provide mouse or keyboard emulation for people with severe physical, neurological, or upper extremity disabilities or spinal cord injury. This device can output mouse clicks, joystick button actions, or keyboard functions. This device It accepts standard 3.5-millimeter (mm) stereo or mono plugs for directly connecting up to two adaptive switches. When used with Beam (not included; see separate entry), the device supports three inp
Swing Away Mount (Model Sm-Sam230)
The Swing Away Mount, model SM-SAM230, is switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This mount attaches directly to a wheelchair armrest. With the pull of a lever the arm swings away for removal when not in use. This mount can be used with proximity sensors or mechanical switches (not included).
Swingaway Mounting Kit (Model 3150-1)
Mounting system for the 3185 joystick for chin oepration. Includes a 12 by 18 inch right angle mounting rod, custom sizes or bends can be provided. A 1/2 inch stainless steel mounting rod fits into a 3/4 inch vertical shaft and a swingaway strap clamp for attachemnt to a standard 7/8 inch diameter wheelchair/power recliner back bar. Permits the joystick to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting apparatus.
Swingaway Mounting Kit (Model 3205-2)
Unsed for mid-line mounting of a hand oeprated joystick. this mounting kit may also be used for mid-line mounting of other devices if the device accepts a 1/4-20 threaded bolt for attachment. Consists of a 1/2 inch diameter stainless steel mounting rod fitted to a 3/4 inch vertical shaft and a swingaway strap clamp for attachment to a standard 7/8 inch diamter armrest frame. A rod clamp is also included for mounting those joysticks which are not furnished with a rod clamp. permits the joystick t
Swingaway Mounting Kit (Model 3514)
Used for mounting a head operated actuator to the wheelchair back bar or push handle. The mounting kit consists of two right angle mounting rods joined by a double rod clamp and fitted to a pivot shaft, and a strap clamp for attachment to 7/8 inch diameter wheelchair tubing. Permits the actuator to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting.
Switch Adaptor Box
The Switch Adaptor Box is a switch adapter for computer designed for use by individuals with upper extremity and fine motor disabilities. When connected to the Penny and Giles Roller Trackball Plus or Joystick Plus (see separate entries), it allows their buttons to be replaced with switches. Connection is made via the switch port on the track ball or joystick. Five jacks on the switch adapter then allow external switches to be used in place of the right/left mouse buttons, drag, double click, an
Switch Click USB
The Switch Click USB is designed for individuals with upper extremity and fine motor disabilities to allow them to simulate a range of mouse clicks on their computer and access iDevice apps with the Switch Click USB single switch computer access aid.
Switch Driver
Switch Driver is an alternative computer control switch program for people with fine motor, neurological or upper extremity disabilities and others who use one or more switches to access a computer. Switch Driver allows the user to configure each switch connected to a computer through a serial or USB port. For each switch, the user can direct that it press a key on the keyboard (with shift, alt or control); press a button on the mouse or move the mouse; press a button on the joystick or move th
Switch Interface Pro
The Switch Interface Pro is a control input interface designed to enable individulas with upper extremity disabilities to operate computers using switches. This unit moves easily between Macintosh and personal computers (PC) and enables up to five single switches (not included) to be connected to control computer functions. The unit is preprogrammed with mouse clicks and keyboard functions. Macintosh users can access a mouse click and the numeric keys 0,1, 2, and 3. PC users can access arrow key
Switch Interface Pro 6.0
Switch Interface Pro 6.0 is a computer interface that helps students with severe physical disabilities and mobility impairments by letting them practice essential switching skills and develop cause and effect and choice-making skills through using up to 5 switches at once to run their switch-enabled software. User can push a single button to change function. It supports 2 switch scanning. Bright lights indicate which switches are active. It requires no software and can be used with Windows and M
Switch It Playstation Adapter
The Switch It Play Station Adapter is a switch adapter designed for use by individuals with physical or mobility disabilities. This device enables a Play Station to be operated using different types of switched joysticks and button switches.
Switch Latch (Model 4388)
The Switch Latch, model 4388, is switch adapter designed to take momentary input from a single switch and converts it to latched on/off output for individuals with physical disabilities. Activating the switch once will turn the toy or device on. Activating the switch again shuts the device off. Alternatively, two single switches can be plugged in so that one switch can act as the "on" switch and the other as the "off". The Switch Latch is designed to be used with battery operated devices such as
Switch Latch / Timer (Model 771)
The Switch Latch/Timer is a switch adapter designed to turn a single switch into an on/off switch or one that turns on a toy or other device for a set period of time. The Switch Latch/Timer works with battery-operated devices such as toys or the Dial Scan (see separate entry). Two switches can be used to operate two differenct devices. In Latch mode, pressing the switch once starts action; pressing it a second time stops the action. In Time mode, action is turned on for a specified amount of tim
Switch Latch And Timer
The Switch Latch and Timer is a switch module providing timed, latched, or momentary switch activation to enable individuals with upper extremity disabilities to operate switch adapted toys, appliances, and other devices. The unit offers a choice of modes, including timed use, switch latching, or momentary switching, and it can accommodate two switches and devices. The package includes the timer unit and a toy cable. POWER: Batteries (included).
Switch Module (Model 1394,1394-8, 1411, 1411-R, 1411-8, & 1411-8R)
The Switch Module is a switch adapter designed to function as a communicator for individuals with communication disabilities. These self-contained modules accept one or more switches for activation and the messages can be recorded as often as needed. Model 1394 provides four, five-second messages and has .25-inch jacks; model 1394-8 has 1/8-inch jacks. Model 1411R offers eight, 2.5-second messages and is equipped with .25-inch jacks; model 1411-8R has 1/8-inch jacks. Model 1411 offers eight, fiv
Switch Mount
The Switch Mount is switch mounting hardware designed for use by individuals with fine motor or upper extremity disabilities. It enables the switch to be secured in two positions, sloping and right angle. A Velcro-style fixing pack is included. SIZES: Small (for Specs (not included; see entry) type switches or any small hand-switch), medium (for Jelly Bean switches, not included; see entry), and large (for Big Red or BigMack switches, not included; see entry). DIMENSIONS (HxW): Sloping surface i
Switch Mounting Assessment Kit (Model 65992)
The Switch Mounting Assessment Kit, model 65992, is a control switch mounting hardware assessment kit designed for evaluating individuals who use switches. The complete kit includes a 13-inch Gooseneck,a one-inch pinch clamp, a platform clamp, one 7/8-inch pinch clamp, one 12-inch switch clamp tube with bushing, one 16-inch tube, one 12-inch 30-degree bend tube, tube clamps,U clamp, Universal Table Mount, Universal Swivel Clamp, Wheelchair Swivel Clamp, Mighty Mount, Tash Mounting Arm, Tash Moun
Switch Mounting Kit (Models Smt & Smw-1)
The Switch Mounting Kit for Tables, model SMT, and Switch Mounting Kit for Wheelchairs SMW-1, are control switch accessories for mounting switches in a variety of locations. Model SMT is designed for use on tables or table-like surface, and model SMW-1 is designed for use with wheelchairs. The Switch Mounting Kit for Tables includes a gooseneck, tilt-top switch mounts, and an adapter bracket to fasten it to tables or shelves. The Switch Mounting Kit for Wheelchairs has a tubular bracket for clam
Switch Mounting Plates (Models 2030, 2080, 2081, & 2082)
The Switch Mounting Plates are switch mounting hardware designed to aid in mounting and positioning switches on wheelchairs and workstations. Model 2030 is a ball joint, model 2080 is a circular plate, model 2081 is a triangular plate, and model 2082 is a rectangular plate. All plates have a 0.25-inch 20 threaded stud back. DIMENSIONS: The circular plate is 3 inches in diameter, the triangular plate has three-inch sides, and the rectangular plate is 3 x 5 inches.
Switch Output Cable (Model 3329)
Used to expand the capability of a Multimode Interface by providing four isloated and independent switch closure outputs controlled by the Multimode's auxiliary operating mode. These outputs (minature phone plugs) may be used to operate various devices if the device is designed for oeration by one to four indpendent switches.
Switch Output Controller (Model 3340)
Used to expand the capbility of a Multimode Interface by providing four isolated and independent switch closure outputs controlled by the Multimode's auxillary operating mode. These outputs (miniature phone jacks) may be used to operate various devices if the device is designed for oepration by one to four independent switches. Includes additional circuitry to inhibit the Multimode's automatic reset function to allow uninterrupted operation.
Switch Radio-Link
The Switch Radio-Link is a switch interface unit designed for use by individuals with severe physical disabilities or spinal cord injury. This interface allows wireless connection of switches to computers, communication aids, toys, environmental controls, and other devices. The interface enables switches to be operated from anywhere within 12 feet, even through obstacles such as people and furniture. It works with all personal computer (PC) switch software that uses a standard switch interface,
Switch Stand (Model Pvc-S)
The Switch Stand, model PVC-S, is a switch holder designed for use by children or adults with neurological or upper extremity disabilities. Velcro is used to attach a switch to the stand so the switch can be accessed using a forward or sideways motion. The stand is compatible with AbleNet Big Red and BIC Mack switches (not included; see entries).
Switch Tray
The Switch Tray is a switch stand designed for use by individuals with fine motor or upper extremity disabilities. Velcro holds switches and switch mounts firmly in place in almost any position. It can be used in assessment situations where a wide variety of secure switch positions need to be tried. The tray is cushioned for comfort. SIZES: Desktop, medium, and small. DIMENSIONS: The Desktop model is 540 x 290 millimeters (mm), the medium model is 350 x 350 mm to fit many wheelchair trays, and t
Switch2Scan For Ipad
Switch2Scan for iPad is a Bluetooth Switch Interface designed for advanced switch users who wish to use the main features of Apple devices and access iBooks. It allows the users to access the home screen, adapted apps and iBooks. Icons or items on the home screen and within most main apps are scanned with a highlight box. Automatic scanning can be conducted with one, two or three switches. Step scanning can be achieved with four switches. There are four scanning speeds. Full access to iBooks req
Switchamajig
Switchamajig is a switch emulation program designed for use by individuals with cognitive, fine motor or upper extremity disabilities. This application (or app) allows a person to use their Apple iPad as a wireless accessibility switch. Switchamajig is designed to be used with the Switchamajig Controller (see separate entry), which can control up to six switch ports on switch-adapted toys or appliances. When the app is opened, the iPad connects to the controller using a WiFi connection. The iPad
Switchamajig Controller
The Switchamajig Controller is a control switch input interface that allows a person to use an Apple iPad to control remotely up to six switch ports on switch-adapted toys or appliances. The user connects the controller to the adapted item(s) using the included cables, and the Controller connects to an Apple iPad running the Switchamajig app (see separate entry) via WiFi. POWER: Requires 2 AA batteries (not included).
Switchboard
The SwitchBoard is a switch adapter for computer designed for use by individuals with fine motor and upper extremity disabilities. This product is a modified keyboard with switch ports to replicate the most commonly used keyboard presses for switches. Switches are plugged into the appropriate ports as needed. There are jacks for enter and space, which are used by most available switch software; 0, 1, 2, and 3, which are used by Don Johnston software; left, up, down, and right, which are used by
Switchbox
The SwitchBox is a switch adapter for computer designed for use by individuals with upper extremity and fine motor disabilities. The switch adapter plugs into the keyboard port on the computer, and the user can then plug up to eight switches into the switch adapter. Its eight switch ports default to the most commonly used key presses for switch software (Space, Enter, up arrow, left arrow, 0, 1, 2, 3). Software is included that allows the user to program the ports to send alternative key presses
Tabaccess
TabAccess is a Bluetooth switch interface for tablets designed for use by individuals with limited physical mobility and coordination. TabAccess enables interaction with tablet apps through connection of multiple accessible devices such as sip/puff, button switches, grasp switches. It is Android and iOS compatible. It is compatible with iOS 7 Switch Control Events. TabAccess can be mounted to power wheelchairs, adjustable beds, etc. No assembly is required for operation.
Tash Mounting Arm System (Model 66000)
The Tash Mounting Arm System, model 66000, is switch mounting hardware designed for use by individuals with upper extremity, neurological, or severe physical disabilities or spinal cord injury. This three-part modular system mounts most Tash switches (not included) and consists of a mounting arm that adjusts with one large knob, the mounting connection appropriate for the specific switch selected, and the base clamp most suited to the environment in which the switch is to be used. Switch connect
Tash Mounting Parts
Tash Mounting Parts are switch mounting hardware pieces designed to enable a switch to be mounted in a desired location for indiviudals who use a switch or communication device. A variety of mounting pieces allow any Tash switch (see separate entries) to be mounted on a wheelchair arm or back, table, or bed rail. The clamps come in the following styles: pinch clamp, platform clamp, switch clamp, tube clamp, U clamp, universal swivel clamp, wheelchair bracket, and a wheelchair clamp.
Tash Sip 'n' Puff Adaptor (Model 32676), 1555 Adaptor (Model 32677), Joystick Adaptor (Model 32678), Mk2 Adaptor (Model 32679), & Adaptor Clamp Bushing (Model 32687)
Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick
Tecla Access
Tecla Access is an alternative computer and cell phone control switch program and a scanning control switch program designed for use by individuals with fine motor or upper extremity disabilities. This application (or app) allows a person to use adapted switches or the driving controls of their powered wheelchair as wireless accessibility switches. Tecla Access is designed to be used with the Tecla Shield (see separate entry), which interfaces with a variety of switch inputs and transmits via Bl
Tecla Shield
The Tecla Shield gives those with limited upper body mobility (due to disability or disease) access to their touchscreen devices. Tecla makes it possible to use iOS and Android smartphones and tablets, as well as computers. All are accessible via assistive buttons, switches or wheelchair driving controls.
Tecla Shield Dos
The Tecla Shield DOS is a control switch input interface designed for people with fine motor control or upper extremity disabilities. The system allows a person to use adapted switches or the driving controls of their powered wheelchair to control remotely an Apple iPod Touch, iPhone or iPad or an Android tablet or smartphone. The Tecla Access app (see separate entry) is required to use the Tecla Shield DOS with an Android device. The switches or driving controls connect to the system using the
Tecla Shield For Iphone & Ipad
The Tecla Shield for iPhone & iPad is a control switch input interface designed for people with fine motor control or upper extremity disabilities. The system allows a person to use adapted switches or the driving controls of their powered wheelchair to control remotely an Apple iPhone or iPad. The switches or driving controls connect to the system using the included cables through the device’s six ports. The ports include 2 3.5-millimeter mono sockets, a D-Sub 9-pin male connector ECU port,
Telephone Management System
The Telephone Management System is a control switch interface unit and speakerphone designed to allow the user full use of telephone functions with a single switch. The user activates a switch twice to answer calls, and then once to end the call. When the user wants to make a call, the device cycles through types of functions, such as dial and redial, allowing the user time to select from these. Then the product cycles through the numbers, also allowing time for the user to make selections. If t
Timer Module (Model 600, 600-8)
The Timer Module, model 600 and 600-8, is a switch adapter designed to set the amount of time a switch-operated device will remain on after the switch is activated for individuals with physical disabilities. The amount of time that the Module activates the device is adjustable from 0 to 30 seconds. Contact manufacturer for information on types of switches and connectors applicable for the Timer Module. POWER: 9-volt battery. DIMENSIONS: 2 x 3 x 1 inches.
Timer Switch
Timer Switch is a switch latch designed for use by individuals with upper extremity disabilities. Pressing the plate surface once activates the device connected to the switch and it will remain activated for the amount of time indicated on the timer, up to 30 seconds. The timer can be readjusted as needed using the control knob. This switch is equipped with a 1/8th-inch jack. POWER: Uses one 9-volt battery (not included).
Touch Drive
The Touch Drive is a control switch designed for use by individuals with physical or mobility disabilities and those who use powered wheelchairs. Similar to a mouse pad on a laptop computer, the Touch Drive allows the user to drive the chair with a touch of a finger. The farther the finger touches from the center of the switch the faster the chair goes in that direction. The device is also incorporated with a mode switch. This device is available for P&G electronics.
Touch On / Touch Off Switch
The Touch On/Touch Off Switch is a touch switch designed for use by individuals with upper extremity disabilities. Pressing the plate once will activate a connected toy or appliance once and pressing it a second time will turn the device off, allowing continuous play or operation. DIMENSIONS: Available in 3 x 5 inches or 5 x 8 inches.
Toy Adapter
Toy Adapter is a battery interface control for toys that allows a single switch to control the operation of a battery-powered device such as a toy. A switch is plugged into one end of the adapter, and a small plate at the other end is inserted between the battery and the battery contacts in the toy. The switch will then turn the toy on and off. Toy Adapters come in three sizes, depending on the size of battery in the toy. The Adapter is available with a choice of a mini plug or a submini plug. P
Toy Adapter Cables (Models Ca-9, Ca-12, & Ca-16)
Toy Adapter Cables allow battery operated toys or devices to be turned on using most single switches (switches not included). The device consists of a cable with a jack for a single switch at one end, and a small metal plate at the other. The plate is inserted between two batteries in a battery-operated device, such as a toy, or between a battery and a battery contact. When a switch is plugged into the jack, the switch will turn the toy on and off. Toy Adapter Cables are available for "C," "AA,"
Toy Cable (Model 4379)
Toy Cable allows a battery operated device such as a toy to be turned on using most single switches (switches not included). It is a cable with a small metal plate at one end and a jack for a single switch at the other. The plate is inserted between two batteries in a battery- operated device or toy, or between a battery and a battery contact. When a switch is plugged into the jack, the switch will turn the toy on and off. POWER: D batteries. DIMENSIONS: 6 feet long.
Toy Cables (Models 4378 & 4379)
Toy cables, models 4378 and 4379, are battery interface controls for toys designed to turn battery operated toys and appliances into switch activated toys and appliances for individuals with physical and cognitive disabilities. One end of the cable is placed between the battery and the battery connector in the battery compartment. The other end of the cable has a 1/8 inch miniature jack for single switch. There are two types: Model 4378 is 6 feet long for AA and C size batteries; Model 4379 is 6
Toy Modification Note: Build It Yourself Battery Interrupter: Revised 1986.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Describes the use of battery interrupters for toys for disabled children and provides instructions for building three types of battery interrupters. Information on construction and use of battery interrupters, or switches, for regular cylindrical batteries, for 9 volt transistor radio type batteries and for use with cassette tape recorders and other devices with a "remote" jack. Includes drawings, a list of sources of information on switches, and a lis
Triswitch Input Controller (Model 3450) & Varibrite Triswitch Display (Model 3460)
The Triswitch, in conjunction with three single-switch actuators, is used for mode selection and oepration of a Multimode Interface. Two of the switch actuators provide left and right actuator commands, while the third switch provides both forward and reverse commands. The display incorporates forward and reverse directional lights with corresponding arrows to provide a visual indication of forward/reverse switch selection. Five additional mode display light are provided to indicate when the Mul
Twitch Switch (Model 1061)
The Twitch Switch, model 1061, is an eyebrow switch designed for use by individuals with severe physical, neurological, or upper extremity disabilities or spinal cord injury. This switch is activated by a small muscle movement such as wrinkling the forehead or raising an eyebrow; the amount of muscle movement required for activation can be adjusted for increased or decreased movement. This switch operates in latching, momentary, or timed mode. The latch mode operates an attached device until the
Two Function Box.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to allow one switch to turn on two toys with similar voltage requirements. Switch made with a small plastic jewelry or watch box, 1 subminiature size jack, 2 subminiature size plugs and 2 pieces of two conductor 22 gauge stranded wire, 4 feet long. Includes instructions, diagrams, a photograph and possible uses. SKILLS REQUIRED: Soldering. Electronics. AUTHOR: Burkhart, L J TITLE: More Homemade Devices for Severely Handicapped Children With Sugg
Ultimate Switch With Quick Disconnect (Model 1072)
The Ultimate Switch, model 1072, is a touch switch designed for use by individuals with physical disabilities. The switch can be activated by the chin, head, any part of an arm or leg. Only one gram of force is needed for activation, but it is sturdy enough to withstand severe blows. If the switch is struck too hard, the spring will absorb the blow and return to the prepositioned station within the user's reach. This model also includes Quick Disconnect mounting hardware which enables the switc
Ultrastik
UltraStik is a surface anchor designed to anchor switches and other items to flat surfaces. This adhesive is reusable, extra tough and sticky, and easy to see. Stickiness can be restored with soap and water. UltraStik is available in packages of three custom cut circles (one to fit a Jelly Bean Switch and two for the Specs switch; see separate entries), a package of two custom-cut circles for the Jelly Bean Switch), or one rectangle to enable he user to cut adhesive to individual needs. DIMENSIO
Universal Adaptive Switch
The Universal Adaptive Switch (UAS) is a multi input switch selector designed to combine features of many popular switches in one unit for individuals who depend on the use of single switches. It can adapt to an individual user's changing needs or accomodate the varied needs of multiple users in group setting. It is a low voltage DC switch with remote control capability and three modes: momentary mode for scanning controls and computer interfaces; latching mode for turning devices on and off; an
Universal Control Panel
The Universal Control Panel is a control input interface for electronic devices used by powered wheelchair users with physical or neurological disabilities. The control panel can be used on any powered wheelchair, and it can control almost any device on the chair, including MP3 players, CD players, radios, fans, and heaters. It also interfaces with all of the manufacturer's products, such as the IllumiRay Lighting System and the HydroFlush Mini (see separate entries). It has 3 powered 12-volt In
Universal Module (Model 615, 616, 616-8)
The Universal Module, model 615, 616 and 616-8, is a control switch interface unit that increases the flexibility of switch controls by providing alternate actions, intention delays and timed outputs for children with physical disabilities. There are 6 output possibilities that can be modified with or without intention delays: Alternate On/Off; Momentary; and Timed (can be used with one or two switches). With Alternate on/off, the initial switch closure turns on a connected device, the secondary
Universal Switch Mounting System
The Universal Switch Mounting System is switch mounting hardware designed to allow quick and easy placement of a switch in any position. The hardware, including a large triangular base plate, clamps onto a wheelchair or tableand holds up to five pounds. The system offers a choice of a single-lever control or a knob control to lock all joints in place. OPTIONS: An Extension Package for the Universal Switch Mounting System is also available; this package includes three sturdy extension rods and a
Universal Swivel Clamp (Model 1620)
The Universal Swivel Clamp is switch mounting hardware that allows adjustment of both the length and angular relationship of two 1/4-inch mounting rods. This permits more flexibility of use of a switch, depending on the individual's position and needs.
Universal Table Mount (Model 59400)
The Universal Table Mount, model59400, is switch mounting hardware designed for use by individulas who uses switches to operate assistive devices. This sturdy mount includes a universal swivel clamp, table mount base, and a straight tube and enables a straignt tube to be directly attached to a table. This mount can be used in conjunction with other Tash mounting hardware (see separate entry) to mount a variety of switches and devices.
Usb Switch Interface
The USB Switch Interface is a switch adapter for computer designed for use by individuals with fine motor and upper extremity disabilities. This switch adapter connects from one to five single switch input devices to a computer. It supports industry standard single switch software applications written for one to five single switches. Switches that have a standard 1/8-inch mini-plug fit directly in the jacks on the interface. Switches with plug sizes other than 1/8 inch can be used with an adapte
Varibrite Mode Display (Model 2775-4)
A remote display used in conjuction with a Multimode interface to indicate when the system is in standby, or in one of four oeprating modes. The display is mounted on a flexible gooseneck to position the display for optimum viewing, and to help protect the display from impact damage. The gooseneck is fitted to a mounting tube for attachment to an armrest using a standard hand-control clamp.
Vibration Switch / Latch / Timer (Model 633)
The Vibration Switch/Latch/Timer is designed for use by individuals with limited movement or motor control. The unit offers switch, latch, or timer modes and, when placed on a flat surface, will activate a connected toy or device with a light tapping of one finger on that flat surface. In the timer mode, the timer output will end at the set time even with continuous input.
Volume Control Adapter (Model 1480)
The Volume Control Adapter (no. 1480) is a computer auditory output amplification accessory that enables the user to control the volume level of computer auditory output when working in a noisy environment or whenever the monitor sound must be adjusted. COMPATIBILITY: The Volume Control Adapter connects between any Apple computer and any monitor which has an 1/8-inch audio input jack.
Wedge Plate Switch (Model 3Tswp)
The Wedge Plate Switch, model 3TSWP, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This switch offers a switch latch mode and a timer mode and the extremely sensitive large surface requires merely a touch to activate and no physical pressure.
Winscan
WinSCAN is a single switch control interface designed to provide independent control access to programs for individuals who are single switch users. This product allows the user to navigate through Windows, choose program icons and run application programs and games. WinSCAN works by superimposing a scanning control display window in front of an application program. The display contains words or icons to represent the functions needed to navigate and operate the software. The display can be posi
Wireless Switch Link
The Wireless Switch Link is a control input interface designed for use by individuals with upper extremity disabilities. This unit is an infrared two-switch interface for remote computer operation. The device comprises a receiver that plugs into the serial port of a computer and a transmitter into which switches (not included) are plugged for use at a remote location.
Wise Control
Wise Control is an adapted AAC device designed for people with poor upper body strength and cortical blindness or cerebral palsy to communicate effectively with their communication device.
Wisp 2000
WISP 2000 is a control switch interface designed for use by individuals with upper extremity disabilities. This wireless device has built-in sip/puff capability and it can be used with any other ability switch connected to the built-in three millimeter stero jack to create wireless control. This switch can transmit two switch closures, and can be used as a remote switch interface for single switch scanning software or for any device controlled by a single or dual switch. WISP 2000 can also be us
X-Keys Controller (Usb)
The X-Keys Controller (USB) is a keyboard interface designed for use by individuals with upper extremity or fine motor disabilities. This unit is a compound programmable keyboard and joystick designed to provide access to custom or stock software and can be used in conjunction with the standard keyboard or as a stand-alone keyboard for applications not requiring a standard keyboard. The patented built-in joystick offers precise control with little movement and the design permits additional contr
X-Keys Desktop
X-Keys Desktop is a keyboard interface designed for use by individuals with upper extremity or fine motor disabilities. This unit is a keypad with 20 user-programmable keys that provide one-button access to shortcuts such as macros and hotkeys. Users can create their own macros with keystroke programming. The keyboard comes in USB or PS/2 versions. COMPATIBILITY: For use on IBM and compatible or Macintosh computers. SYSTEM REQUIREMENTS: For PC, 2000, XP, or Vista operating system. For Mac, OSX o
X-Keys Foot Pedal
The X-Keys Foot Pedal is a keyboard interface designed for use by individuals with upper extremity or fine motor disabilities. This unit is a programmable keyboard designed to provide access to custom or stock software and can be used in conjunction with the standard keyboard or as a stand-alone keyboard for applications not requiring a standard keyboard. The unit provides three foot pedals that can be programmed to replace keyboard commands; a separate command can be programmed with the pedal
X-Keys Pro
The X-Keys Pro is a keyboard interface designed for use by individuals with upper extremity or fine motor disabilities. This unit is a programmable keyboard designed to provide access to custom or stock software and can be used in conjunction with the standard keyboard or as a stand-alone keyboard for applications not requiring a standard keyboard. The unit provides 58 user-programmable keys that accept multiple keystrokes, enabling multiple keystrokes to be programmed to a single key. Informati
X-Keys Usb Switch Interface
The X-Keys USB Switch Interface is a computer control input interface designed for use by individuals with upper extremity disabilities. This unit enables up to 12 single switches (not included) to be connected to a computer to activate standard or onscreen keyboard and mouse commands. The unit is programmable by flipping a switch on the side of the unit, pressing a switch, and keying the desired function or sequence from the main keyboard. COMPATIBILITY: For use with IBM and compatible computer
X10 2-Way Appliance Module (Model Am14A)
The X10 2-Way Appliance Module, model AM14A, is an environmental control interface module designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This module allows remote control of appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, and TVs, and enables the user to determine automatically which X10-controlled appliances are turned on and which are turned off. The module is designed for use with X10-compatible computer int
X10 Universal Module (Model Um506)
The X10 Universal Module, model UM506, is an environmental control switch module designed to switch any low voltage load for individuals with physical disabilities. The module responds to X10 (sold separately) command signals which originate from environmental controls and other remote controls. This module uses isolated contacts to control such low voltage devices as sprinkler systems, drapery controls, garage door openers, and yard lighting. It can be set for momentary or sustained contact clo
Zingui
Zingui is a dynamic tool for augmentative communication designed for use by individuals with communication, cognitive, learning or speech disabilities. Zingui allows users to make recordings and store them into message cells. It comes with ready-made vocabulary that can be personalized. The Zingui can be operated via touch screen, through one or two switches, a USB mouse or any other USB access method.
Zingui Plus offers all the features of Zingui, but with added text-to-speech software featurin
Zumo
Zumo is designed for use by children with or without special needs to control tablet application and games. Once paired to a device, simply press Zumo’s buttons and apps respond to the child’s input on-screen. Once Zumo is paired to a device, users press the buttons and apps respond to the child’s input on-screen. Children are provided a unique experience by mapping their physical movements to fine touch screen gestures.
ZyBox 2-SC iOS Switch Interface
The ZyBox 2-SC iOS Switch Interface allows control of iDevice with up to three switches. When plugged into iOS device, it powers up, indicated by LED) and automatically recognize the interface. Set up and define switch actions the first time with Switch Control on each iOS device. Once set up, simply plug in ZyBox 2-SC, plug in switch or switches, and begin. Lightning connects directly to docking connector of device, leaving Bluetooth connection available for other uses. Zybox is powered by dev