CORONAVIRUS (COVID-19) RESOURCE CENTER Read More
do-it-yourself

Pull-Out Tray.

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray pulls out between legs from under wheelchair seat to hold catheterization equipment. The tray is made from 1/2 inch birch plywood cut the width of the wheelchair seat. The plywood is placed on the side seat rails over the upholstery. The bottom of the plywood has two rails to retain a narrow tray between the plywood seat and the upholstery. A stop is placed at the back of the tray to prevent it from sliding out the back. A cupboard latch is used to hold the sliding ray in place. Finish with polyurethane. A cushion should be used on top of the plywood seat. Includes photographs. SKILLS REQUIRED: Woodworking. AUTHOR:Shapbell, J; Sweigart, J. TITLE:Making A Pull-Out Tray REF:Journal: Accent on Living; Spring; p 94. 1985.

Available

Price Check
as of: 
01/17/2001